4 channel Video +Audio To Fiber Converter 2 channel BIDI Video +Audio To Fiber Converter Beyondopto video transmitters and receivers support 4-channels of 8-bit digitally encoded broadcast qualityvideo + 4-channels audio+1 channel reverse RS485 data over one multi-mode or single-mode opticalfiber. The devices are directly compatible with NTSC, PAL, and SECAM camera systems. Especially for PTZ Cameras and support RS485, RS232, and RS-422 data protocols Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. LED indicators are provided to instantly monitor the system operating status. A typical installation utilizes a transmitter unit at the camera end of the link, connected via a single fiber optic cable, to a receiver unit at the monitoring end of the link. Devices are available for either stand alone or rack-mount installation with the BATR 14-Slot Chassis. 4 channel Video +Audio To Fiber Converter Panel And Connection Graphs 2 channel BIDI Video +Audio To Fiber Converter Panel And Connection Graphs
Features
• 8-Bit Uncompressed Video Transmission
• NTSC, PAL or SECAM Video Compatible • 24-Bit Digitally Encoded Audio • Support Point-to-Point or Daisy-Chain connection • Multimode Fiber transmit up to 1.5 km without Optical Attenuation • Single-Mode Fiber transmit up to 80km without Optical Attenuation • WDM Technology for Higher Reliability • No EMI, RFI, Cross Talk or Video Distortion and no ground loops • LED Indicators for Instant System Monitoring • Standalone or Rack Mount in FVC14 Chassis • Produce according to customer's specifications,providing OEM Typical Application
The Fiber Optical Video Converter is an all-digital fiber transmission device,with world-class non-compression, all digital video correction technology and Gigabit fiber transmission technology. It supports long-distance, non-distortion and real-time transmission of 1~64 channels of video signal (and other kinds of signals if necessary) in one-core fiber optic.They are suitable to the purpose of monitor and surveillance in expressways, the customs, transportation, electronic police, industrial automation, power service, banks, and water conservation projects, etc...
Typical Configuration Specifications Video | Number of Channels | 4 | Input/output impedance | BNC 75Ω (unbalance) | Video bandwidth | 5HZ—7.5MHZ | Standard video input/output voltage | 1.0Vp-p | Video voltage range | 0.6~2.0Vp-p | Differential Gain | < ±1.5% | Differential Phase | < ±1° | S/N Ratio: | 67dB | Connecter | BNC |
Audio | Input/output Impedance | 600ohm(unbalance) | Max input/output voltage | 3.0Vp-p | Frequency Response | 10 Hz～29kHz @±3dB | SNR | > 70dB | Connector | Screw terminal strip |
Data | Data protocol | RS232、RS422、RS485、Manchester，BIPHASE data | Data rate | 0~500 Kbps | Error rate | < 10-9 | Connector | Screw terminal strip |
Electrical & Mechanical | Input Power Requirements: | DC 5V@2A | Power Adapter: | AC 100V~240V | Power Consumption: | < 3W | Stand-Alone Dimensions: | 183mm × 154mm × 30mm | Shipping Weight: | (include Transmitter & Receiver ) 1.5kg |
Environmental | Operating Temperature: | -20°C ~ +75°C | Storage Temperature: | -40°C ~ +85°C | Relative Humidity: | 0% ~ 95% (non-condensing) | MTBF: | >100,000 hours |
Ordering Information & Optical Specifications Model | Fiber Mode | Connector | Wavelengths | Optical Power Budget | Max Transmission Distance | Transmitter | Receiver | BAT4041SS1 | BAR4041SS1 | SM | FC | 1310nm | 18dB | 25km | BAT4041MS1 | BAR4041MS1 | MM | FC | 1310nm | 16dB | 1.5km | BAT4041SS3 | BAR4041SS3 | SM | SC | 1310nm | 18dB | 25km | BAT4041SS2 | BAR4041SS2 | SM | ST | 1310nm | 18dB | 25km |
Note:
• The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth.
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug.
• Please feel free to consult factory for any special requirement and customization. • Due to continuous improvement, all fiber optic transmission systems and video over fiber product specifications are subject to change without further notice. | 
